شاحنات إطفاء رغوة صغيرة الحجم خفيفة الوزن بسعة 3500 لتر مع مضخة 30 لتر/ثانية
JDX5100GXFPM35/B foam fire truck adopts QL11009KARY ISUZU chassis, USA HALE AP32 fire pump, USA AKRON 3430 fire monitor and other fire-fighting equipment. It is usually used by public security fire brigades in large and medium cities, petrochemical companies and airports and other professional fire brigade.The vehicle has the features of a good structure and reasonable layout, easy operation and maintenance.
1,Whole vehicle
1.1 Fire extinguishing agent capacity(L): water:2320,Foam:1065
1.2 Crew member: 3
1.3 PTO Broken Shaft (Pneumatic Control)
2,Crew room
3.1 Structure: Carbon steel skeleton, mask is bonded to LF2 aluminum alloy plate.
3.2 Seat setting: 3 seats. There are three air breathing apparatus racks at the backrest.
3,Pump and piping system
3.1 Water pump
| الشركة المصنعة | الصين |
| الطراز | CB10/30 type |
| Pressure / flow | 1.0MPa / 30L / s |
| Water diverter | ?? |
| النوع | Piston vacuum pump |
| Maximum vacuum | ≥85 كيلو باسكال |
| Suction | 7 م |
| وقت تحويل الماء | ≤35 ثانية |
| Foam Proportion Mixer Model | PH48 |
3.2 Piping system
| Inlet | There is a Φ100mm suction port at the rear of the pump room. A water inlet with a Φ100mm manual butterfly valve for connection to the water tank. |
| Water injection port | There is one Φ80mm tank water inlet on each side of the pump room. A pump with a DN65 manual ball valve at the rear of the tank is filled into the tank. |
| Water outlet | There is one Φ80mm water outlet with ball valve on each side of the pump room, and one DN80 gun line is set behind the tank. |
| Residual water pipeline | In order to protect the water pump and each ball valve, a residual water ball valve is installed in the pipeline. |
| Cooling water piping | In order to protect the normal operation of the power take-off, additional cooling devices are provided in the pipeline. |
| External suction line | G1 1/2" manual ball valve and KY40 tube interface are used. |
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. س: ما هي طريقة الدفع الخاصة بك؟
ج: تفضيل T/T و L/C.
4. س: هل تقوم بترتيب الشحن للمركبات؟
ج: نعم، يمكننا ترتيب الشحن بناءً على شروط التجارة.
5. س: كيف هو التعبئة؟
ج: جميع التعبئات تتوافق مع المعايير التصديرية.
إذا كانت لديك أي أسئلة أخرى، فلا تتردد في الاتصال بنا.
المراجعات
لا توجد مراجعات بعد.