Kendaraan
| Ukuran Keseluruhan | (L × W × H) 9900×2500×3450mm(approx.) |
| Ban | 10.00-20-16PR |
| Kecepatan maksimum | 105km/jam |
| Wheelbase: 6350mm | 6350mm |
| Beban penuh | 26.000kg |
Chassis
| Model | FVM23S |
| Driving Model | 6 × 2 |
| Driving Mode | Tangan Kanan |
| Model Mesin | ISUZU |
| Bahan Bakar | Diesel |
| Standar pembuangan | Euro III |
| Conclusion and Call to Action | 270HP |
Kabin
IZUSU standard Safety Cab.
Water and foam tank
| Water tank | 7,000L |
| foam tank | 750 L |
| Material: | Tank material: 304 stainless steel, bottom thickness: 4 mm, wall thickness |
| Peralatan | 1 No. overflow device |
| 1 No. level indicators | |
| 2 No. discharge outlet, with ball valves, to discharge from the side of the vehicle. | |
| 2 No. injection inlets, mounted beneath both two sides of the vehicle, through the top of the vehicle to inject water down. | |
| 1 No. foam outlet |
Pompa Kebakaran
| Manufacturer | America W.S.Darley & Co.,Ltd. |
| Model | KSP1000 single stage |
| Laju aliran | 60L/dtk |
| Tekanan | 1.0Mpa |
| Installation | rear mounted |
Monitor kebakaran
| Model | PLKD48 electronic monitor PLKD |
| Location | Top of tank |
| Jet monitor Rotation angle | 348° |
| Spry nozzle elevation | ≤90° |
| Spry nozzle depression angle | ≤-15° |
| Work pressure | ≤1.0 Mpa |
| Laju aliran | 48L/S. |
| Jangkauan lempar | water: ≥60 foam: ≥55 |
Powder tank: 250kg
Work pressure: 1.4MPa
The tank is a pressure vessel, with feeding powder inlet, discharge outlet, nitrogen pipeline and discharge pipe. There are annular nitrogen pipes with intake valve inside tank, so the gas mixed with the dry powder symmetrically, to be fluidized state.The intake valve is designed to keep the powder away from the nitrogen pipeline.
Nitrogen cylinder group
Cylinder Number: 1 pcs
Cylinder capacity: 90L/pcs
Charge pressure: 15MPa
Model: JDX5260GXFGP90 Mobil Pemadam Kebakaran Foam/Powder
FAQ:
1. Q: Apakah Anda pabrik atau perusahaan perdagangan?
A: Shanghai Jindun Special Vehicle equipment Co., LTD adalah salah satu pabrik terbesar untuk kendaraan khusus di China.
2. Q: Di mana lokasi pabrik Anda?
A: Kami berlokasi di Provinsi Shanghai, China.
3. Q: Apa metode pembayaran Anda?
A: T/T dan L/C lebih disukai.
4.Q: Apakah Anda mengatur pengiriman untuk kendaraan?
A: Ya, kami dapat mengatur pengiriman berdasarkan syarat perdagangan.
5. Q: Bagaimana dengan kemasan?
A: Semua kemasan memenuhi standar ekspor.
6. Q: What's the delivery time?
A: 1) 20 days delivery upon receipt of advance deposit if we have ready in stock for normal standard model.
2) ISUZU & Chinese brand chassis 3 months upon receipt of advance deposit.
3) European brand chassis 9 months upon receipt of advance deposit.
Jika ada pertanyaan lain, silakan hubungi kami.
Ulasan
Belum ada ulasan.