4×2 400L Foam 3 Seats 1.0Mpa Heavy Rescue Fire Truck

Detail Produk:

  • Kedalaman Hisap
    7m
  • Diversion Time
    ??35s
  • Kursi (termasuk Pengemudi)
    3
  • Drive Type
    4×2
  • Tekanan
    1.0Mpa
  • Kecepatan Maks.
    90Km/h
  • Kapasitas
    Water 7600L
  • Busa
    400L
  • Tempat Asal
    shanghai China
  • Nama Merek
    CIMC
  • Sertifikasi
    ISO9001,CCC
  • Nomor Model
    PM80
  • Jumlah Pesanan Minimum
    1 unit
  • Price
    negotiable
  • Waktu Pengiriman
    90days
  • Syarat Pembayaran
    L/C, D/A, D/P, T/T, Western Union, MoneyGram
SKU: M2522 Kategori:

DN150 Outside Inlet Water And Foam Fire Trucks DN100 Monitor Pipeline 90km/H

Chassis

ManufacturerSino howo
ModelZZ5207M4617D5
Tipe penggerak4×2
KabinFlat top four-door lengthen
Jarak Sumbu Roda4600mm
Berat bersih sasis7230kg
Max. load20490Kg
Kecepatan maksimum90km/jam
Diameter putar minimum??18.6m
Mesin tipeInline six-cylinder, four-stroke, water-cooling, inter-cooling engine
ModelD10.28-40
Daya maksimum206Kw/1900r/min
Standar emisiChina IV/Euro IV
KoplingMonolitik, kering
Transmisi modelManual 9JS119
Ban12.00—20

Pompa kebakaran

ManufacturerShanghai Xiongzhen
ModelCB10/60-XZ ordinary pressure
Aliran60L/dtk
Tekanan1.0MPa
Pengalihan airPompa primer piston
Derajat vakum maksimum??85 kPa
Waktu priming≤80d
Suction depth7m

Pipa

Pipa keluar

4×DN80 ordinary pressure outlet

1×DN50 katup bola

Inlet hisap

1×DN150 outside inlet

1×DN150 valve

Pipa monitor

1×DN100 monitor pipeline

1×DN100 butterfly valve

Saluran keluar air sisaKeran air
Saluran pipa air pendinginPTO dilengkapi dengan saluran pipa air pendingin yang terhubung dengan saluran masuk-keluar.

Fire extinguishing system

Pipeline system:

Drainage pipeline: An external suction port of DN100 pump, located at the rear of the car body, is equipped with a DN100 manual butterfly valve, with a special rubber elastic connection devic e at the appropriate part of the pipeline;

Outlet pipeline: There is a DN80 atmospheric outlet on both sides of the body.

Water injection pipeline: There is a DN80 water injection port on both sides of the body, a water injection pipeline controlled by DN50 ball valve from pump to tank, and a rubber connection section in the middle.

Redundant water pipeline: Redundant water cock is installed at the lowest convenient operation position of pipeline and pump, which can quickly remove the residual water in the system when needed.

Cooling pipeline: Additional cooling pipeline is set up to protect the power take-off from running for a long time.

External suction foam line: G1 1/2 "manual ball valve and KY40 interface.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “4×2 400L Foam 3 Seats 1.0Mpa Heavy Rescue Fire Truck”