The foam fire truck is refited from the Chassis produced by SinoTRK Jinan Truck Co., LTD in China. The whole layout is reasonable . Equipment compartment, liquid tank and pump room are adopt split structure with novel and coordinated appearance. China brand fire pump is installed on rear of the vehicle and fire monitor on roof. The compact structure makes easy operation and maintenance.
The vehicle carries 8000L fire extinguishant and with fast speed. It's mainly used in petrochemical enterprises, oil terminals, oil fields, airports, and full-time fire brigades in large and medium-sized cities and enterprises.
1. Vehicle
| Dimensi (P×L×T) | About 8475×2500×3400 (mm) |
| Gross Vehicle weight | 19800 (kg) |
| Curb Weight | 11600 (kg) |
| Daya maksimum | 213Kw/290HP |
| Kabin | 2+4 seats, double cabin |
2. Chassis
- Brand : Sinotruk Howo
- Drive type : 4×2
- Wheelbase : 4600 mm
- Rated Speed : 100 km/h
- Engine type : Pressure combustion, In-line six-cylinder, water cooling, inter-cooling, direct injection diesel engine.
- Gearbox : Manual
3. Fire pump ( Chinese brand )
- Pressure/Flow : 3600 L/min at 1.0 Mpa
- Priming time : ≤ 50s
- Suction depth : 7m
4. Fire fighting system
| Inlet hisap | 1 outside suction and valve |
| Pipa monitor | 1monitor pipeline 1 butterfly valve |
| Saluran keluar | 4 ordinary pressure outlets 1 ball valve |
5. Pump drive system
| PTO | Sandwich type |
| Model | YTQ600F |
| Transmission shaft | High balance precision transmission shaft, use intermediate support connection |
6. Liquid Tank
| Kapasitas | Water: 6000 Liters, Foam:2000 Liters |
| Material | High Quality Stainless Steel 304 |
| Struktur | Total side girder structure |
Perangkat | 2 lubang akses 2 overflow devices 2 sensor level cairan 2 drain outlet with valves 4 ujung pipa pengisian |
| Technical requirements | Mematuhi aturan GA39.4-92 |
FAQ:
1. Q: Apakah Anda pabrik atau perusahaan perdagangan?
A: Shanghai Jindun Special Vehicle equipment Co., LTD adalah salah satu pabrik terbesar untuk kendaraan khusus di China.
2. Q: Di mana lokasi pabrik Anda?
A: Kami berlokasi di Provinsi Shanghai, China.
3. Q: Apa metode pembayaran Anda?
A: T/T dan L/C lebih disukai.
4.Q: Apakah Anda mengatur pengiriman untuk kendaraan?
A: Ya, kami dapat mengatur pengiriman berdasarkan syarat perdagangan.
5. Q: Bagaimana dengan kemasan?
A: Semua kemasan memenuhi standar ekspor.
6. Q: What's the delivery time?
A: 1) 20 days delivery upon receipt of advance deposit if we have ready in stock for normal standard model.
2) ISUZU & Chinese brand chassis 3 months upon receipt of advance deposit.
3) European brand chassis 9 months upon receipt of advance deposit.
Jika ada pertanyaan lain, silakan hubungi kami.
Ulasan
Belum ada ulasan.