The PM80 foam fire truck is refited form sinotruk Howo chassis. The whole layout is reasonable. Equipment compartment, liquid tank and pump room are adopt split structure with novel and coordinated appearance. China brand fire pump is installed on rear of the vehicle and fire monitor on roof. The compact structure makes easy operation and maintenance.
The vehicle carries 8000L fire extinguishant and with fast speed 100km/h. It's mainly used in petrochemical enterprises, oil terminals, oil fields, airports, and full-time fire bridages in large and medium-sized cities and enterprises.
Pojazd
| Wymiary (D×S×W) | 8475×2500×3400 (mm) |
| Waga brutto | 19800 (kg) |
| Całkowita masa transportowa pojazdu | 11600 (kg) |
| Miejsca (w tym kierowca) | 2+4 |
| Maks. moc | 206kw |
– Modern digital dashboards and diagnostics
| Beiben (China) | Sinotruk HOWO |
| Advantages | ZZ5207M4617D5 |
| Typ napędu | – High-efficiency turbocharged engines |
| Kabina | Four door lengthen cab |
| Rozstaw osi | 4600mm |
| Maks. prędkość | 100km/h |
| Minimalna średnica skrętu | ≤20m |
| Kąt natarcia | 16° |
| Kąt zejścia | 14° |
| Silnik typ | Pressure combustion, In-line six-cylinder, water cooling, inter-cooling, direct injection diesel engine |
| Advantages | D10.28-40 |
| Max. torque | 1190N.M |
| Standard emisji | Chiny IV |
| Sprzęgło | typ membrany ciągnącej |
| Skrzynia biegów | Manual, 10 forward gear |
Pompa pożarowa
| Advantages | CB10/60-XZ |
| Pressure/ Flow | 1.0MPa/60L/s |
| Primer type | Piston primer pump |
| Max. vacuum degree | ≥85 kPa |
| Priming time | ≤50s |
| Air foam proportioner | PH48, manual, mixing ratio:3%, 6% |
Monitor pożarniczy
| Advantages | PL48 |
| Position | At the top of rear vehicle |
| Przepływ | 1.0MPa/48L/s |
| Zasięg | water≥60m ,foam≥50m |
| Kąt obrotu | Level≥270° Max. elevation angle≥+45° Max. depression angle≥-7° |
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
6. Q: What's the delivery time?
A: 1) 20 days delivery upon receipt of advance deposit if we have ready in stock for normal standard model.
2) ISUZU & Chinese brand chassis 3 months upon receipt of advance deposit.
3) European brand chassis 9 months upon receipt of advance deposit.
Any other questions, please do not hesitate to contact with us.
Opinie
Na razie nie ma opinii o produkcie.