Vehicle
| Genel Boyut | (L × W × H) 9900×2500×3450mm(approx.) |
| Lastik | 10.00-20-16PR |
| Maksimum hız | 105km/s |
| Dingil mesafesi: 6350mm | 6350mm |
| Tam yük | 26,000kg |
Şasi
| Model | FVM23S |
| Driving Model | 6 × 2 |
| Driving Mode | Sağ El |
| Motor Modeli | ISUZU |
| Yakıt | Dizel |
| Boşaltma standardı | Euro III |
| Motor Gücü | 270HP |
Cabin
IZUSU standart Güvenlik Kabini.
Water and foam tank
| Su tankı | 7,000L |
| foam tank | 750 L |
| Malzeme: | Tank material: 304 stainless steel, bottom thickness: 4 mm, wall thickness |
| Ekipman | 1 No. overflow device |
| 1 No. level indicators | |
| 2 No. discharge outlet, with ball valves, to discharge from the side of the vehicle. | |
| 2 No. injection inlets, mounted beneath both two sides of the vehicle, through the top of the vehicle to inject water down. | |
| 1 No. foam outlet |
Yangın Pompası
| Üretici | America W.S.Darley & Co.,Ltd. |
| Model | KSP1000 single stage |
| Flow rate | 60L/s |
| Pressure | 1.0Mpa |
| Installation | rear mounted |
Yangın monitörü
| Model | PLKD48 electronic monitor PLKD |
| Konum | Top of tank |
| Jet monitor Rotation angle | 348° |
| Spry nozzle elevation | ≤90° |
| Spry nozzle depression angle | ≤-15° |
| Work pressure | ≤1.0 Mpa |
| Flow rate | 48L/S. |
| Throw range | water: ≥60 foam: ≥55 |
Powder tank: 250kg
Work pressure: 1.4MPa
The tank is a pressure vessel, with feeding powder inlet, discharge outlet, nitrogen pipeline and discharge pipe. There are annular nitrogen pipes with intake valve inside tank, so the gas mixed with the dry powder symmetrically, to be fluidized state.The intake valve is designed to keep the powder away from the nitrogen pipeline.
Nitrogen cylinder group
Cylinder Number: 1 pcs
Cylinder capacity: 90L/pcs
Charge pressure: 15MPa
Model: JDX5260GXFGP90 Köpük/Toz Yangın Söndürme Aracı
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
6. S: Teslimat süresi nedir?
C: 1) Normal standart model için stokta hazırsa, peşin depozito alındıktan sonra 20 gün teslimat.
2) ISUZU ve Çin markası şasi, peşin depozito alındıktan sonra 3 ay.
3) Avrupa markası şasi, peşin depozito alındıktan sonra 9 ay.
Any other questions, please do not hesitate to contact with us.
Değerlendirmeler
Henüz değerlendirme yapılmadı.