6×4 Drive Commercial Fire Trucks 12.5 Tons Water and Foam Tanker Fire Truck
The commercial firefighting truck was modified from Mercedes-Benz Actros3336 chassis, 6×4 drive.Max power 265kw. Single Cab with two seats. The commercial fire truck could load 6500kg water and 6000kg foam. Equipped with POK fire monitor, rated flow 80L/s and shoot range over 75 meters.
Technical specification for commercial fire trucks
Main datas of commercial fire trucks
| Dimension | 9720×2500×3705mm |
| G.V.W | 28000kg |
| Complete vehicle shipping mass | 15350kg |
| Seat capacity | 2, include driver |
| Max. power | 265kw |
Şasi
| Marka | Mercedes-Benz |
| Model | Actros3336 |
| Tahrik tipi | 6×4 |
| Kabin | Manual operation hydraulic forward turnover |
| Dingil mesafesi | 4500+1355mm |
| Max. total mass | 18000kg |
| Max. speed | 95km/s |
| Min. turning diameter | <21m |
| Approach angle | 17° |
| Departure angle | 13° |
Fire pump equipped on commercial fire truck
| Üretici | |
| Model | R600 |
| Flow | 90L/s |
| Pressure | 1.0MPa |
| Water diversion | Piston primer pump |
| Max. vacuum degree | ≥85 kPa |
| Priming time | ≤80s |
| Otomatik halka pompa köpük | PH48x2 |
| Tip | Manuel |
| Karışım oranı | 3%, 6% |
Firefighting systems of commercial fire truck
| Kapasite | Water: 6500kg, Foam: 6000kg |
| Malzeme | 304 high quality corrosion resistant plate |
| Yapı | Toplam yan kiriş |
| Pressure | 1.0MPa |
| Ekipman | 2 gözlem kapağı 1 taşma cihazı 2 sıvı seviye sensörü 2 DN50 drain outlets with valve 4 dolum borusu ucu GA39.4-92 kuralına uygun |
Equipment tank
| Malzeme | Q235A high quality steel combine with porous steel |
| Yapı | Split type welding structure |
| Ekipman bölmesi kapısı | The light quality aluminum alloy, with shutter doors, lightweight and reliable. |
| İç yapı | Alüminyum lap teknolojisinin tanıtımı için iç çerçeve, ekipman içindeki alan kullanımını ve değişkenliği en üst düzeye çıkarabilir, kullanıcılar çeşitli kayar braket, vagon, döner çerçeve ve yüksek dayanımlı plastik depolama kutusu gibi taleplerde bulunabilir, yapı alan kullanımından, estetik görünümden, ekipmanın kullanım kolaylığından uluslararası ileri düzeye ulaşmıştır. |
Fire monitor equipped on commercial fire truck
| Model | POK, PLC6000 |
| Install position | Arka çatı |
| Flow rate | 80L/s |
| Pressure | 1.0MPa |
| Throw range | water≥75m ,foam≥70m |
| Dönüş açısı | Level ≥270° Max. elevation angle ≥+45° Max. depression angle ≥-7° |
Foot pedal
Location: At the bottom of roller shutter door.
Material: Steel frame covered by aluminum alloy checkered plate.
Structure: adopt the gas springs plus shutter fasten, safe and reliable, each petal plate bearing ≥150Kg.
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard of firefighting trucks.
6. Q:What's your main products?
A:Our main product include : commercial fire trucks, water & foam tank trucks, CAFS fire trucks, chemical fire trucks, emergency rescue vehicles, pumper fire truck, lighting trucks, aerial ladder and platform trucks, airport fire trucks, water tower fire trucks and other general fire trucks. The products have been sold to more than 20 countries.
Any other questions, please do not hesitate to contact with us.
Değerlendirmeler
Henüz değerlendirme yapılmadı.