1000 Gallons Small Fire Engine with Double Row Cabin of 5 Firefighters

1. 회사 소개

• CXFIRE는 1963년에 설립된 중국 최대의 소방차 제조업체입니다. 연간 생산량은 1000대의 소방차입니다. 주요 공장은 중국 청두에 위치하며 면적은 200,000 평방미터이고 직원 수는 600명입니다.
• CXFIRE는 중국에서 국제 인증을 통과한 최초의 소방 보호 회사이며, 그 제조 기준은 ISO, CCC, CE, EN, NFPA의 요구 사항을 충족할 수 있습니다. 국가 고기술 기업으로서 현재 CXFIRE는 발명 특허, 외관 디자인 특허 및 실용 신안 특허를 포함하여 300개 이상의 특허를 보유하고 있습니다.

2. 소형 소방차 개요

 
3. 섀시 매개변수:
3.1 제조사: 둥펑 자동차 주식회사.
3.2 섀시 유형: 선택 사항
3.3 구동 방식: 4×2
3.4 휠베이스: 3800mm
3.5 엔진 유형: 선택 사항
3.6 실린더 수: 4
3.7 유형: 직렬, 4행정, 수냉식, 과급, 중간 냉각
3.8 엔진 출력: 105kw (140HP)
3.9 클러치: 단일, 건식, 다이어프램 스프링, 유압 제어
 

4. Superstructure Parameters

4.1 Cabin

4.1.1 Structure: Double-row seat integrated welding structure with special hydraulic turning mechanism.

4.1.2 Seats: 1+1 in the front row, 4 people in the back row.

4.1.3 Safety: Three-point pre-tightened seat belts are installed.

4.1.4 SCBA Setting: SCBA brackets are installed at the rear seats, and 6.8L-9L air cylinders can be placed.

4.1.5 Interior: PTO switch and alarm lights switches installed in the cab etc.

4.1.6 Lighting: Original lighting of chassis.

4.1.7 Step ladder: High-strength integrated non-slip step ladder.

4.1.8 Storage space: Storage box is arranged under the rear seats.

4.1.9 Air conditioning: fluorine-free environmental protection air conditioning system.

4.1.10 Handrail: Non-slip safety handrail.

4.2. Subframe

4.2.1 Material: High-strength special steel.

4.2.2 Performance: The liquid tank and the sub-frame are connected by elastic connecting seats with torque reduction performance, which not only increases the flexibility of the connection between the frame and the tank, prevents deformation and breakage of the upper body, but also increases the strength of the upper body.

4.3. Compartment

4.3.1 Material: All made of high-strength aluminum alloy profiles.

4.3.2 Structure: The frame of the carriage is all-aluminum alloy frame welded structure, and the outer skin is made of bonded aluminum alloy plates.

4.3.3 Roof guard: Made of aluminum alloy as a whole, with strobe warning lights and exterior lights installed outside, and LED roof lights inside.

4.3.4 Ladder frame: A set of multifunctional ladder frame is set on the top.

4.3.5 Rear ladder: An aluminum alloy safety ladder leading to the roof is set on the right side of the rear.

4.4. 롤러 셔터

4.4.1 Material: Lightweight high-quality aluminum alloy.

4.4.2 Structure: A diversion groove on the top and a sealing strip around it, which has good rainproof and dustproof sealing performance.

4.4.3 Layout: The sides of the equipment box and the rear pump room.

4.5. 풋 페달

4.5.1 Material: High-quality aluminum alloy profile.

4.5.2 Structure: Overall drawing structure of aluminum alloy profile, with a width of 50cm and a load-bearing capacity of more than 300kg.

4.5.3 Layout: Under the equipment box and pump room.

4.6. Electrical System

4.6.1 Warning light warning: Long row warning light are set on the top; The control devices are installed in the cab.

4.6.2 Equipment box lights: There are LED white lighting strips on both sides of the equipment box. The light switch and the rolling door are linked.

4.6.3 Strobe lights: Strobe lights for warning are arranged on the upper part.

4.6.4 Exterior lighting: LED lights for lighting are provided on the upper part of the compartment.

4.6.5 Roof lighting: LED lights are provided inside the top of the carriage.

4.6.6 Side Indicater Light: Built-in yellow indicater lights are installed on pedals.