Light Duty 4×2 Drive 8000L Foam Fire Fighting Truck With Manual Fire Monitor
Fire truck (also called fire fighting vehicle , Fire engine , Fire fighting apparatus , Fire service truck , Fire and rescue truck , fire truck , fire fight truck , Foam fire tank truck , Fire extinguishing foam tanker ) is a vehicle designed primarily for fire fighting operation to extinguish fire efficiently to prevent fire spread , reducing the loss caused by fire maximumly .
車両
| 寸法 (L×W×H) | 8475×2500×3400 mm |
| 総重量 | 19800 kg |
| 完全車両輸送質量 | 11600 kg |
| シート | 6, include driver |
| Max. power | 206kw |
シャーシ
| 製造者 | シノトラック HOWO |
| Drive type | 4×2 |
| キャブ | Four door lengthen cab |
| Wheelbase | 4600mm |
| Max. speed | 100km/h |
| 最小旋回直径 | ≤20m |
| アプローチアングル | 16° |
| デパーチャーアングル | 14° |
| クラッチ | pull type diaphragm |
| Gearbox | Manual, 10 forward gear |
Pump drive system
| PTO | Sandwich type |
| モデル | YTQ600F |
| 製造者 | YANGZHONG |
| Transmission shaft | High balance precision transmission shaft, use intermediate support connection |
消防モニター
| モデル | PL48 |
| 位置 | 後部車両の上部 |
| 流量 | 1.0MPa/48L/s |
| 範囲 | water≥60m ,泡≥50m |
| 回転角度 | レベル≥270° 最大仰角≥+45° 最大俯角≥-7° |
Fluid tank
| 容量 | Water: 6000L Foam: 2000L |
| Material | High quality stainless steel 304 |
| Structure | Total side girder structure |
デバイス | 2 ingate 1 overflow device 2 liquid level sensor 2 DN40 drain outlet with valve 4 DN80 filling pipe end |
| Technical requirements | Conform to rule GA39.4-92 |
Side girder
Features: made of welding high quality profiled steels, two longitudinal beams through a plurality of beam intensity bearing joint of high strength bolt connection. The side beam is installed, use girder structure, to ensure that the original car beam of uniform stress, improve the service life of the girder, and reduce deformation caused by components twisted.
よくある質問：
1. Q:Are you a factory or a trade company?
A: 上海金盾特種車両設備有限公司は、中国で特種車両の最大の工場の一つです。.
2. Q:Where is your factory located?
A: 私たちは中国の上海省にあります。.
3. Q:What's your payment method?
A: T/TとL/Cが好まれます。.
4. Q: 車両の出荷を手配しますか？
A:はい、貿易条件に基づいて出荷を手配できます。.
5. Q: How is the packing?
A:すべての梱包は輸出基準に準拠しています。.
6. Q: What's the delivery time?
A: 1) 20 days delivery upon receipt of advance deposit if we have ready in stock for normal standard model.
2) ISUZU & Chinese brand chassis 3 months upon receipt of advance deposit.
3) European brand chassis 9 months upon receipt of advance deposit.
他に質問がある場合は、お気軽にお問い合わせください。.
レビュー
レビューはまだありません。