6×4 Drive Commercial Fire Trucks 12.5 Tons Water And Foam Tanker Fire Truck

製品詳細:

  • Chassis Brand
    メルセデス・ベンツ
  • Rated Speed
    95 Km/h
  • Gross Vehicle Weight
    28000 kg
  • 駆動タイプ
    6×4
  • Wheelbase
    4500+1355 Mm
  • Seats Quantity
    Two Seats,include Driver
  • Max Power
    266 Kw
  • 水タンク容量
    6500kg
  • 泡タンク容量
    6000 L
  • キーワード
    Commercial Fire Truck; 12.5 Ton Foam Fire Truck
  • 原産地
    Shanghai,China
  • ブランド名
    CIMC Jindun
  • 認証
    ISO9001/CCC/EN1028-01
  • モデル番号
    JDX5280GXFPM120/B
  • 最小注文数量
    1 ユニット
  • 価格
    工場価格、交渉可能
  • 梱包詳細
    輸出標準パッケージまたはカスタマイズパッキング
  • 配送時間
    3 months after sign contracts
  • 支払い条件
    L/C, D/A, T/T, Western Union, MoneyGram, D/P
  • 供給能力
    350 units/year
商品コード: M2063 カテゴリー:

6×4 Drive Commercial Fire Trucks 12.5 Tons Water and Foam Tanker Fire Truck

The commercial firefighting truck was modified from Mercedes-Benz Actros3336 chassis, 6×4 drive.Max power 265kw. Single Cab with two seats. The commercial fire truck could load 6500kg water and 6000kg foam. Equipped with POK fire monitor, rated flow 80L/s and shoot range over 75 meters. 

Technical specification for commercial fire trucks

Main datas of commercial fire trucks

寸法 9720×2500×3705mm
総重量28000kg
完全車両輸送質量15350kg
Seat capacity2, include driver
Max. power265kw

シャーシ

ブランドメルセデス・ベンツ
モデルActros3336
Drive type6×4
キャブManual operation hydraulic forward turnover
Wheelbase4500+1355mm
Max. total mass18000kg
Max. speed95km/h
最小旋回直径<21m
アプローチアングル17°
デパーチャーアングル13°

Fire pump equipped on commercial fire truck

製造者public safety
モデルR600
流量90L/s
圧力1.0MPa
Water diversionPiston primer pump
Max. vacuum degree≥85 kPa
Priming time≤80s
Auto ring pump foamPH48x2
マニュアル
Mixing ratio3%, 6%

Firefighting systems of commercial fire truck

容量Water: 6500kg, Foam: 6000kg
Material304 high quality corrosion resistant plate
StructureTotal side girder
圧力1.0MPa
Equipment

2 manholes

1 overflow device

2 liquid level sensors

2 DN50 drain outlets with valve

4 filling pipe ends

Conform to rule GA39.4-92

Equipment tank

MaterialQ235A high quality steel combine with porous steel
StructureSplit type welding structure
Equipment compartment doorThe light quality aluminum alloy, with shutter doors, lightweight and reliable.
Internal structurethe inner frame for the introduction of aluminum lap technology, can maximize space utilization and variability within the equipment, users can request allocation of various sliding bracket, carriage, rotating frame, and high strength plastic storage box and so on, the structure from the space utilization, aesthetic appearance, ease of handling equipment have reached the international advanced level.

Fire monitor equipped on commercial fire truck

モデルPOK, PLC6000
Install positionRear roof
Flow rate80L/s
圧力1.0MPa
Throw rangewater≥75m ,foam≥70m
回転角度

Level ≥270°

Max. elevation angle ≥+45°

Max. depression angle ≥-7°

Foot pedal

位置:ロールシャッターの底部。.

材料:アルミ合金チェッカープレートで覆われた鋼フレーム。.

構造:ガススプリングとシャッターファスナーを採用、安全で信頼性が高く、各花びらプレートの耐荷重は≥150Kgです。.

よくある質問:

1. Q: あなたは工場ですか、それとも貿易会社ですか?

    A: 上海金盾特種車両設備有限公司は、中国で特種車両の最大の工場の一つです。.

2. Q: あなたの工場はどこにありますか?

    A: 私たちは中国の上海省にあります。.

3. Q: お支払い方法は何ですか?

    A: T/TとL/Cが好まれます。.

4. Q: 車両の出荷を手配しますか?

   A:はい、貿易条件に基づいて出荷を手配できます。.

5. Q: 梱包はどうなっていますか?

    A:All the packing comply with exporting standard of firefighting trucks.

6. Q:What's your main products?

    A:Our main product include : commercial fire trucks, water & foam tank trucks, CAFS fire trucks, chemical fire trucks, emergency rescue vehicles, pumper fire truck, lighting trucks, aerial ladder and platform trucks, airport fire trucks, water tower fire trucks and other general fire trucks. The products have been sold to more than 20 countries.

他に質問がある場合は、お気軽にお問い合わせください。.

レビュー

レビューはまだありません。

“6×4 Drive Commercial Fire Trucks 12.5 Tons Water And Foam Tanker Fire Truck” の口コミを投稿します