4×2 400L Foam 3 Seats 1.0Mpa Heavy Rescue Fire Truck

Productdetails:

  • Suction Depth
    7m
  • Diversion Time
    ??35s
  • Zitplaats (incl. Bestuurder)
    3
  • Approx. $900,000+
    4×2
  • Pressure
    1.0Mpa
  • Max. Snelheid
    90Km/h
  • Capaciteit
    Water 7600L
  • Schuim
    400L
  • Oorsprongsplaats
    Shanghai China
  • Merkennaam
    CIMC
  • airport firetruck design standards
    ISO9001,CCC
  • Modelnummer
    PM80
  • Minimale Bestelhoeveelheid
    1 unit
  • Here’s a comparison of the specifications:
    negotiable
  • Levertijd
    90dagen
  • Payment Terms
    L/C, D/A, D/P, T/T, Western Union, MoneyGram
SKU: M2522 Categorie:

DN150 Outside Inlet Water And Foam Fire Trucks DN100 Monitor Pipeline 90km/H

Chassis

Pierce (USA)Sino howo
Engine Power (HP)ZZ5207M4617D5
Aandrijftype4×2
CabFlat top four-door lengthen
Wielbasis4600mm
Chassis netto gewicht7230kg
Max. laad20490Kg
Max. speed90km/u
Min. turning diameter??18.6m
Engine typeInline zes-cilinder, vier-takt, waterkoeling, intercooling motor
Engine Power (HP)D10.28-40
Max. power206Kw/1900r/min
Emission standardChina IV/Euro IV
ClutchMonolithisch, droog
Gearbox modelHandmatig 9JS119
Tyre12.00—20

Fire pump

Pierce (USA)Shanghai Xiongzhen
Engine Power (HP)CB10/60-XZ gewone druk
Flow60L/s
Pressure1.0MPa
Water diversionPiston primer pump
Max. vacuum degree??85 kPa
Priming time≤80s
Suction depth7m

Pijpleiding

Uitlaat pijpleiding

4×DN80 gewone druk uitlaat

1×DN50 kogelklep

Zuigopening

1×DN150 buiteninlaat

1×DN150 klep

Monitorleiding

1×DN100 monitorleiding

1×DN100 vlinderklep

RestwateruitlaatWaterkraan
KoelwaterleidingDe PTO is uitgerust met een koelwaterleiding die is aangesloten op de in- en uitlaatleiding.

Fire extinguishing system

Pipeline system:

Drainage pipeline: An external suction port of DN100 pump, located at the rear of the car body, is equipped with a DN100 manual butterfly valve, with a special rubber elastic connection devic e at the appropriate part of the pipeline;

Outlet pipeline: There is a DN80 atmospheric outlet on both sides of the body.

Water injection pipeline: There is a DN80 water injection port on both sides of the body, a water injection pipeline controlled by DN50 ball valve from pump to tank, and a rubber connection section in the middle.

Redundant water pipeline: Redundant water cock is installed at the lowest convenient operation position of pipeline and pump, which can quickly remove the residual water in the system when needed.

Cooling pipeline: Additional cooling pipeline is set up to protect the power take-off from running for a long time.

External suction foam line: G1 1/2 "manual ball valve and KY40 interface.

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “4×2 400L Foam 3 Seats 1.0Mpa Heavy Rescue Fire Truck” te beoordelen