4×2 400L Foam 3 Seats 1.0Mpa Heavy Rescue Fire Truck

产品详情:

  • 吸水深度
    7米
  • Diversion Time
    ??35s
  • 座位(包括驾驶员)
    3
  • 驱动类型
    4×2
  • 压力
    1.0Mpa
  • 最高速度
    90Km/h
  • 容量
    Water 7600L
  • Foam
    400L
  • 原产地
    上海 中国
  • 品牌名称
    中集集团
  • 认证
    ISO9001,CCC
  • 型号
    PM80
  • 最小订单数量
    1台
  • 价格
    negotiable
  • 交货时间
    90days
  • 付款条款
    L/C, D/A, D/P, T/T, 西联汇款, MoneyGram
SKU: M2522 分类:

DN150 Outside Inlet Water And Foam Fire Trucks DN100 Monitor Pipeline 90km/H

底盘

制造商中国豪沃
模型ZZ5207M4617D5
驱动类型4×2
驾驶室Flat top four-door lengthen
轴距4600毫米
底盘净重7230千克
最大载重20490千克
最大速度90公里/小时
最小转弯直径??18.6米
引擎 类型直列六缸、四冲程、水冷、 intercooling 发动机
模型D10.28-40
最大功率206千瓦/1900转/分钟
排放标准中国IV/欧洲IV
离合器单体、干式
变速箱 型号手动 9JS119
轮胎12.00—20

消防泵

制造商上海雄震
模型CB10/60-XZ 普通压力
流量60L/s
压力1.0MPa
引水活塞吸水泵
最大真空度??85 kPa
引水时间≤80s
Suction depth7米

管道

出口管道

4×DN80 普通压力出口

1×DN50 球阀

吸入口

1×DN150 外部入口

1×DN150 阀门

监测管道

1×DN100 监测管道

1×DN100 蝶阀

残余水出口水龙头
冷却水管道PTO配备了与进出口管道连接的冷却水管道。.

Fire extinguishing system

Pipeline system:

Drainage pipeline: An external suction port of DN100 pump, located at the rear of the car body, is equipped with a DN100 manual butterfly valve, with a special rubber elastic connection devic e at the appropriate part of the pipeline;

Outlet pipeline: There is a DN80 atmospheric outlet on both sides of the body.

Water injection pipeline: There is a DN80 water injection port on both sides of the body, a water injection pipeline controlled by DN50 ball valve from pump to tank, and a rubber connection section in the middle.

Redundant water pipeline: Redundant water cock is installed at the lowest convenient operation position of pipeline and pump, which can quickly remove the residual water in the system when needed.

Cooling pipeline: Additional cooling pipeline is set up to protect the power take-off from running for a long time.

External suction foam line: G1 1/2 "manual ball valve and KY40 interface.

评价

目前还没有评价

成为第一个“4×2 400L Foam 3 Seats 1.0Mpa Heavy Rescue Fire Truck” 的评价者