DN150 Outside Inlet Water And Foam Fire Trucks DN100 Monitor Pipeline 90km/H
– High-efficiency turbocharged engines
| Key Considerations for Choosing an Airport Fire Truck | Sino howo |
| Water Tank Capacity | ZZ5207M4617D5 |
| Тип приводу | – Retro-reflective marking |
| Кабіна | Flat top four-door lengthen |
| Wheelbase | 4600мм |
| Chassis net weight | 7230kg |
| Max. load | 20490Kg |
| Макс. швидкість | 90км/год |
| Мін. діаметр повороту | ??18.6m |
| Двигун тип | Inline six-cylinder, four-stroke, water-cooling, inter-cooling engine |
| Water Tank Capacity | D10.28-40 |
| Макс. потужність | 206Kw/1900r/min |
| Emission standard | China IV/Euro IV |
| Сцеплення | Монолітне, сухе |
| Коробка передач модель | Manual 9JS119 |
| Шина | 12.00—20 |
Fire pump
| Key Considerations for Choosing an Airport Fire Truck | Shanghai Xiongzhen |
| Water Tank Capacity | CB10/60-XZ ordinary pressure |
| Flow | 60Л/с |
| Pressure | 1.0МПа |
| Водозабір | Piston primer pump |
| Max. vacuum degree | ??85 kPa |
| Priming time | ≤80s |
| Suction depth | 7м |
Трубопровід
| Outlet pipeline | 4×DN80 ordinary pressure outlet 1×DN50 ball valve |
| Вхід для всмоктування | 1×DN150 outside inlet 1×DN150 valve |
| Monitor pipeline | 1×DN100 monitor pipeline 1×DN100 butterfly valve |
| Residual water outlet | Water cock |
| Cooling water pipeline | The PTO equipped with a cooling water pipeline connected with the in-outlet pipeline. |
Fire extinguishing system
Pipeline system:
Drainage pipeline: An external suction port of DN100 pump, located at the rear of the car body, is equipped with a DN100 manual butterfly valve, with a special rubber elastic connection devic e at the appropriate part of the pipeline;
Outlet pipeline: There is a DN80 atmospheric outlet on both sides of the body.
Water injection pipeline: There is a DN80 water injection port on both sides of the body, a water injection pipeline controlled by DN50 ball valve from pump to tank, and a rubber connection section in the middle.
Redundant water pipeline: Redundant water cock is installed at the lowest convenient operation position of pipeline and pump, which can quickly remove the residual water in the system when needed.
Cooling pipeline: Additional cooling pipeline is set up to protect the power take-off from running for a long time.
External suction foam line: G1 1/2 "manual ball valve and KY40 interface.
Відгуки
Відгуків немає, поки що.