Dimensions
| Item | unit | parameter |
| Dimensions (length x width x height) | mm | 10720×2500×4000 |
| Front suspension | mm | 1440 |
| Wheelbase | mm | 4500+1350 |
| Rear suspension | mm | 2950 |
| Extension | mm | 250 |
| Wheel distance | mm | Front 2050 rear 1800 |
Ladder performance
| Item | unit | parameter |
| Ladder section number | 4 | |
| Ladder length | ||
| Full contraction | m | 9.65 |
| Full extension | m | 30.05 |
| Stand up | ? | -10~75 |
| angle of rotation | ? | 360 |
| Max height | m | 30.7 |
| Maximum amplitude | m | 18.2 |
| Lifter load | N | 1800 |
| Working bucket load | N | 4000 |
Transmission
| Model | Mercedes Benz G240-16, all synchronous transmission |
| Speed ratio | 16 forward gear, 2 reverse gear |
| Shift type | Mercedes Benz Telligent® intelligent shift system |
| Water pump PTO | Mercedes Benz NMV200 engine full power PTO |
| Speed ratio | 1.48 |
| Maximum output torque | 1500Nm |
| Rotation | counter clockwise (same as the engine rotation direction) |
| Output position | the top of the middle, 120mm tooth flange output |
| Other | for long time operation |
| Oil pump PTO | Mercedes Benz MB1b gearbox PTO |
| Speed ratio | 1.24 |
| Maximum output torque | 700Nm |
| Rotation | counter clockwise (same as the engine rotation direction) |
| Output position | at 4 o'clock direction, 100mm tooth flange output |
| Other | for long time operation |
Engine
- Model:Benz OM501 LAEngine
- Displacement: 11.946 liters
- Maximum capacity :320kW/435hp@1800r/min
- Maximum torque:2100Nm@1080r/min
- Emission standards: European IV, use SCR Blue-Tec catalytic postprocessing Technology
Specifications
- V type 6 cylinder turbocharged diesel engine;
- Electronic control unit pump, Mercedes Benz direct injection system, injection pressure 1800 bar;
- Benz Telligent® intelligent engine management system;
- Benz Telligent® intelligent maintenance system;
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
6. Q: What's your main product?
A: Our main product include : water & foam tank trucks, CAFS fire trucks, chemical fire trucks, emergency rescue vehicles, lighting trucks, aerial ladder and platform trucks, airport fire trucks, water tower fire trucks and other general fire trucks. The products have been sold to more than 20 countries.
Any other questions, please do not hesitate to contact with us.
Reviews
There are no reviews yet.