25m JP25 Water Tower Fire Truck on IVECO Chassis
The JP25 is a water tower fire truck built on an IVECO CURSOR13 F3BE3681BR chassis for municipal brigades. It is designed to reach upper floors from the street, where ground monitors cannot place water. A two-section folding boom carries the monitor to a maximum working height of 25m. The working radius is 10m, and the appliance stays on its outriggers during the attack.
Power comes from a 368kW engine rated 500hp at 1900 rpm. Peak torque is quoted as 2300 at 1000 rpm, sent through a ZF 16S 2520 TO manual gearbox. A 300L steel fuel tank and a 55L urea tank support long shifts. The China IV emission standard suits regulated urban fleets. Front axle 4x 385/65 R22.5 highway tires pair with rear 8x 315/80 R22.5 traction tires.
The boom is welded from high-strength steel and extends within 80 s. The outriggers deploy within 45 s across a 5950x2040mm footprint. Upper and lower sections articulate through 0-80° and 0-160°. The rotation range is 0-360°. The hydraulic system runs at 20MPa, and the maximum wind velocity is 12.5m/s. A monolithic clutch keeps pump drive predictable at the scene. Outrigger beams sit on the sub-frame for a stable working base.
Crews deploy the JP25 for high-rise compartment fires, warehouse fires and industrial incidents. The monitor must work above the roofline in each of those cases. Because the water tower fire truck carries its own tank feed, it can hold an exterior attack position. Ground crews advance lines inside the building while the monitor protects the stairwell. That split of duties keeps the pump operator and the boom operator clear of each other.
Full specifications
| Model | IVECO CURSOR13 F3BE3681BR |
|---|---|
| Max. engine power | 368kW/500hp@1900 |
| Max. torque | 2300@1000 |
| Fuel tank | 300L steel fuel tank |
| Emission standard | China IV |
| Urea tank | 55L |
| Clutch | Monolithic |
| Gearbox | ZF 16S 2520 TO manual |
| Front axle | 4x 385/65 R22.5 highway tires |
| Rear axle | 8x 315/80 R22.5 traction tires |
| Rim | 11.75×22.5/9.00×22.5 |
| Spare wheel | 1×315/80 R22.5 highway tire with rim |
| Max. working height | 25m |
| Max. working radius | 10m |
| Rotation range | 0-360° |
| Boom extending time | ≤80s |
| Outrigger extending time | ≤45s |
| Hydraulic system pressure | 20MPa |
| Max. wind velocity | 12.5m/s |
| Outrigger longitudinal and transverse | 5950x2040mm |
| Upper boom change angle | 0-80° |
| Lower boom change angle | 0-160° |
| Specification parameter | Anti-clockwiseSpeed ratio1.5Max. torque 1300N.m120mm flange plate |
Where it fits
Suited to city centre high-rise response, warehouse and petrochemical incidents where the monitor must work above the roofline. It pays off where appliance access is tight and the fire floor sits beyond ground monitor reach.
