32m TGS33.440 Water Tower Fire Truck 5000 kg Water
The TGS33.440 is a MAN 6×4 water tower fire truck. It combines water tanker, foam truck and ladder functions in one appliance. The telescopic crane uses three flexing plus one folding arm. It reaches a maximum working height of 32m and a maximum working range of 20m. That covers middle-rise building fires from a single position.
A V-type 6-cylinder turbocharged and intercooled diesel engine delivers 440hp at 1800 r/min. Maximum torque is 2100N.M at 1080rpm under Euro IV. Chassis weight is 9300Kg with a maximum allowable load of 24700Kg. The wheelbase is 4500 + 1350 mm, and top speed is 104Km/h. Minimum turning diameter is below 22.3 m. The 6×4 chassis carries the boom load through a reinforced sub-frame.
The arm acts within 110 s and the legs deploy within 40 s. Outrigger span is 5800 x 4820mm. Hydraulic system pressure is 20MPa and the maximum allowable wind speed is 12.5 m/s. The tank holds 5000 kg of water and 2000 kg of foam in 304 stainless steel, feeding a HALE pump at 6000L/min or 3000L/min.
The cab is a modified crew of 2+4 with a rear rack for four SCBA sets. The crew therefore rides ready to work at height. The water tower fire truck is aimed at middle-rise buildings in cities, mines, oil fields and factories. Foam mixer ratio is 6% manual adjustment, with water and foam range of at least 65m and 60m.
Full specifications
| Manufacturer | MAN (Iveco, Mercedes, or Scania is also available.) |
|---|---|
| Model | TGS33.440 |
| Drive Type | 6 x 4 |
| Cab | Modified Crew (2+4),Rear rack installation four SCBA |
| Wheelbase | 4500 + 1350 mm |
| Chassis weight | 9300Kg |
| Maximum allowable load | 24700Kg |
| Maximum speed | 104Km / h |
| Minimum turning diameter | <22.3 m |
| Engine | V-type 6-cylinder turbocharged and intercooled diesel engin |
| Maximum engine power | 440hp / 1800r / min |
| Maximum torque | 2100N.M / 1080rpm |
| Emission standard | Euro IV |
| Clutch | monolithic, dry type |
| Maximum working height | 32m |
| Maximum working range | 20m |
| Boom Action time | ≤110s |
| Leg action time | ≤40s |
| Hydraulic system pressure | 20MPa |
| The maximum allowable wind speed | 12.5m / s |
| Outrigger span | 5800 x 4820mm |
| Water / foam range | ≥65 / 60m |
| Foam mixer ratio | 6% (manual adjustment) |
| Water | 5000 |
| Kg Foam | 2000 Kg |
| Material | 304 stainless steel tank, stainless steel top plate 304 patterns |
| Structure | damping rubber flexible support, which consists of longitudinal and transverse anti-swing plate is mounted on the sub-frame; |
| Manufacturing | USA HALE |
| Flow | 6000L / min 3000L / min |
| Pressure | 1.0MPa 1.7MPa |
| Diversion | four piston water device |
| Seal | mechanical seal |
Where it fits
Suited to middle-rise building fires in cities, mines, oil fields and factories, where a 32m boom and an on board water load shorten the attack. It also covers small foam incidents that open water cannot knock down.
