JP60 60m Water Tower Fire Truck with 31m Working Radius
The JP60 is a 60m water tower fire truck on an 8×4 chassis, built for large incidents at oil drilling sites, high rise construction, chemical plants and warehouses. Gross weight is 42600kg and the body measures 13160mm by 2500mm by 3950mm on a wheelbase of 1950+4600+1400mm. Working height is 60m with a working radius of 31m.
An MC13.54-50 in line turbo diesel of 12.4L makes 540hp at 1900rpm to Euro V. It is fed from a 350L fuel tank and supported by a 2000W generator with 2 x 12V/165AH batteries. The M-cab seats 1+1. Road speed is 85km/h or more, and the boom set is a three section telescopic boom down plus a three section telescopic boom up.
The down boom travels 0 to 88 degrees and the up boom 0 to 164 degrees, with 360 degree infinite rotation. Outriggers level manually and extend in 40 seconds or less; raising the boom to rated height and slewing 90 degrees takes 270 seconds or less. The Waterous single stage centrifugal pump delivers 100L/s at 1.0MPa or 70L/s at 1.4MPa through a DN200 intake and DN150 outtake.
The AKRON 5177 telecontrol monitor flows 950 to 4800L/min at 0.55MPa, reaching 70m with water and 60m with foam. It swivels 45 degrees each way, elevates 90 degrees and depresses 45 degrees. A 95 model manual foam mixer proportions at 1 to 10 percent. Two ESP-24V vacuum pumps prime in under 50 seconds at 85 kPa or better, and wireless control works beyond 100m.
Full specifications
| Vehicle name | JP60 water tower fire fighting truck |
|---|---|
| Driving | 8×4 |
| Wheelbase | 1950+4600+1400mm |
| engine | MC13.54-50,Euro V emission standard, turbo , diesel engine in line. |
| Engine power | 540hp/1900rpm |
| Engine capacity | 12.4 L |
| Fuel tank | 350 L |
| Battery box | 2000W generator,2X12V/165AH battery |
| Cab | M-cab,1+1 seating |
| dimension:(LxWxH) | 13160x2500x3950mm |
| Gross weight | 42600kg |
| Max. running | ≥85km/h |
| Outrigger leveling | manual leveling |
| Max. working height | 60m |
| Max. working radius | 31m |
| Boom structure | 3 section telescopic boom(down)+ 3 section telescopic boom (up) |
| Boom action angle | Down Telescopic boom 0°——88°Up Telescopic boom and down telescopic boom 0°——164° |
| Rotation range | 360°infinite rotation |
| Outrigger extending time | ≤40s |
| Boom raised to rated height and rotation 90° | ≤270s |
| pump | American Waterous company, single stage centrifugal pumpflow:100 L/S @ 1.0 Mpa 70 L/S @ 1.4 Mpaintake flange:DN200,outtake flange:DN150 |
| Vacuum pump | ESP-24V electric slip sheet vacuum pump 2 pieces( 24V)Vacuum capacity≥85kPa~suction depth≥~m~water drawing time less than50s. |
| mixer | Manual 95 model foam proportional mixer, the ratio is 1-10% |
| Firemonitor | American AKRON , MONITOR HEAD 5177 , water and foam usetelecontrol monitor.Monitor body made by CIMC.Water flow :950~4800L/min x pressure 0.55MPa.Water reach≥70m,foam reach≥60m.Swivel angle±45 degree x elevation angle 90 degree x depressionangle 45 degree.≥100m wireless control |
Where it fits
Built for oil terminals, chemical plants and large warehouses where a high monitor stream must reach over tank walls and roof lines. The 60m height and 31m radius cover tall structures, and the wireless control keeps operators clear of the fire.
