Rotatable Cab 6×4 Drive Foam Fire Truck Red Printed Eight Cylinders Engine

  • Chassis: Daimler Actros4160 chassis with a rotatable cab and a 1700+4300+1350 mm wheelbase.
  • Engine: 440 kw inline eight cylinder diesel engine with 2800 N.m of torque under China IV/Euro IV.
  • Crew: Six seats in a 1+1+4 layout with air breathing apparatus mounts and a storage box under the seat.
  • Payload: 38650 kg gross weight, 20600 kg shipping mass and a 11310x2500x3630 mm body.
  • Drive: Manual gearbox with 16 forward gears, 95 km/h top speed and a 26 m turning diameter for yard access.
  • Tires: 4x 385/65R22.5 front tires and 8x 315/80R22.5 rear tires on the 8×4 layout of the chassis.
SKU: M2204 Category:

Actros4160 8×4 Foam Fire Truck with Rotatable Cab

The Actros4160 is an 8×4 foam fire truck on a Daimler chassis with a rotatable cab, built for high-volume foam attacks at refineries and fuel depots. It measures 11310x2500x3630mm at 38650kg gross weight and 20600kg shipping mass. It seats six in a 1+1+4 layout, and the rotatable cab turns the crew toward the working side.

An inline eight-cylinder, four-stroke, water-cooled electronic direct injection diesel produces 440kw and 2800N.m. It drives a manual gearbox with 16 forward gears through a dry clutch. The engine meets China IV and Euro IV limits. Top speed is 95km/h, the turning diameter is listed at 26m or more, and approach and departure angles are 23 and 11 degrees.

The front axle runs four 385/65 R22.5 tyres and the rear eight 315/80R22.5. That spread carries the 38650kg gross weight over four axles, with tyre sizes matched to the axle loads. The rotatable cab turns the crew compartment toward the working side. A covered storage box under the seat holds air breathing apparatus mounts, keeping sets within reach on the approach.

The 8×4 layout and 440kw rating suit a foam attack sustained from the vehicle while a relay is set. The 1700+4300+1350mm wheelbase carries the long body. The rotatable cab lets the crew watch the monitor without leaving their seats. The 20600kg shipping mass leaves a wide payload margin for a full foam load and its lockers.

Full specifications

Dimension (LxWxH) 11310x2500x3630mm
Gross weight 38650kg
Complete vehicle shipping mass 20600kg
Seat (inc. driver) 6
Max. power 440kw
Manufacturer Daimler
Model Actros4160
Drive type 8×4
Cab Rotatable type
Wheelbase 1700+4300+1350mm
Max. speed 95km/h
Min. turning diameter ≥26m
Approach angle 23°
Departure angle 11°
Engine type Inline eight-cylinder, four-stroke, water-cooling, electronic direct injection diesel engine
Max. torque 2800N•m
Emission standard China IV/Euro IV
Clutch Monolithic, dry
Gearbox model Manual, 16 forward gear
Forward 4x 385/65
R22.5 Rear 8x 315/80R22.5
Structure Rotatable type
Seat 1+1+4
Equipment Except the original equipments. There is a storage box with cover under the seat, embedded air breathing apparatus fixed mount in the seats

Where it fits

Built for refineries and fuel depots that need maximum foam output and a crew cab that can face the working side. It also suits terminals where the appliance must hold a blanket from its own tank during a long relay.