Brigade Hose Reel Water Dry Power and Foam Fire Truck 6.45m Lifting 4×2 Drive

  • Pump flow: Rosenbauer R600 pump delivers 90 L/s at 1.0 MPa for foam lines and cooling streams.
  • Foam system: PH48x2 manual foam proportioner sets a 3% or 6% mixing ratio for class B fuel fires.
  • Dry powder: 500 kg dry powder tank feeds two 30 m hose reel guns at a working pressure of 1.2 to 1.4 MPa.
  • Response: Dry powder leaves the gun at 5 kg/s and throws 12 m or more, keeping crews outside the heat.
  • Chassis: MAN TGS33.400 6×4 chassis carries a 15000 kg maximum total mass and a Euro 3 emission rating.
  • Engine: MAN D2066LF49 engine produces 294 kW and drives the pump through a PTO suited to pump operation.
SKU: M2267 Category:

MAN TGS33.400 Foam Fire Truck with 500Kg Dry Powder

This foam fire truck is built on the MAN TGS33.400 6×4 chassis and combines a Rosenbauer R600 pump with a dry powder system, giving two extinguishing agents from one vehicle. It serves refinery, port and industrial brigades. The headline figure is 500Kg of dry powder alongside 90L/s of foam solution at 1.0MPa, so a crew can switch agent without changing vehicle.

The MAN D2066LF49 engine produces 294kw under Euro 3 emission control, on a 15000kg maximum total mass, with a PTO rated for pump operation. The R600 pump delivers 90L/s at 1.0MPa, primed by a piston primer pump to 85 kPa or more in 80 s or less. Two PH48 proportioners meter foam at 3% or 6%.

The dry powder tank is a pressure vessel welded from Q345R material, with a filling port, a discharge port, a nitrogen delivery pipe and a discharge tube. A ring-shaped nitrogen manifold with multiple intake valves fluidises the powder evenly and keeps it out of the gas pipe. Working pressure is 1.2 to 1.4MPa, with 2 sets of dry powder gun and 30m hose reel.

The powder system throws 5Kg/s over 12m or more, which covers spill and pressure fires that foam alone will not knock down. A reducing valve, a safety valve and a control box with air source main valve, air filter, solenoid valve, fuse box and relay complete the installation. Grouping those parts in one box shortens fault finding during a call-out.

Full specifications

Manufacturer MAN
Model TGS33.400
Drive type 6×4
Emission standard Euro 3
Max. total mass 15000kg
PTO Suitable for pump operation
Engine Model MAN D2066LF49
Max. power 294kw
Flow 90L/s
Pressure 1.0MPa
Water diversion Piston primer pump
Max. vacuum degree ≥85 kPa
Priming time ≤80s
Auto ring pump foam PH48x2
Type Manual
Mixing ratio 3%, 6%
Dry powder filling capacity 500Kg
Working pressure 1.2 ~ 1.4MPa
Dry powder gun and hose reel 2 sets (30m)
Effective spray rate 5Kg/s
Shot range ≥12m

Where it fits

Refinery, tank farm and port incidents where foam alone may not knock down a pressure fire. The 500Kg dry powder system and the 90L/s pump give two agents from one vehicle.