M2454 IVECO ML 100E22 Foam Fire Truck with 500 L Foam
The M2454 is a 4×2 foam fire truck on the FIAT IVECO ML 100E22 chassis, with a 2200L water tank and a 500L foam tank feeding a HALE AP32 pump. The pump delivers 32L/s at 1.0MPa, and the pipework is arranged so the crew can run two delivery lines and a foam line from the rear bay. Gross weight is 7800 kg and the cab seats five in a 2+3 layout.
The 160kW engine, badged at 217hp, produces 680N.M of torque between 1200 and 2100 r/min from 5.88L of displacement. Top speed is 110km/h and the chassis rides on a 2790mm wheelbase with 169mm of clearance at the front axle and 172mm at the rear. Minimum turning radius is 5.2m, which is what makes the vehicle usable in old town streets.
The suction side uses a DN100 butterfly valve inlet with electric and manual operation, plus a DN125 outside coupling with a stainless steel butterfly valve and a snap type lid. Two DN80 ordinary outlets run manual ball valves, the pump outlet is a 10mm stainless steel ball valve, and the outside liquid inlet takes a KY40 tooth coupling.
The pump drafts to 7m. A static source such as a pond, a canal or a portable tank is enough to keep the appliance working after the onboard water is gone. That matters on rural roads and industrial yards where hydrants are sparse. The compact body keeps the appliance inside a single bay while still carrying water, foam and a full hose set.
Full specifications
| Value | 5270x2200x2980 |
|---|---|
| Gross weight | Wheel base |
| kg | mm |
| Water tank capacity | Foam tank capacity |
| Max. engine power | Emission standard |
| kW/hp | ~ |
| (217hp) | China V |
| Max. speed | Seat (inc. driver) |
| Km/h | ~ |
| Approach angle | Departure angle |
| Manufacturer | FIAT IVECO |
| Model | ML 100E22 |
| Driving | 4×2 |
| Min. turning radius | 5.2m |
| Min. ground clearance | Front 169mm, rear 172mm |
| Chassis Net weight | 10910Kg |
| Departure angle | 18° |
| Engine | IVECO TECTOR 6, F4AE3681B*S |
| Max. authorized total mass | 10000kg |
| Displacement | 5.88L |
| Max. torque | 680N•m/1200~2100r/min |
| Max. power | 160kW (217hp)/2700r/min |
| Fuel tank | 115L plastic fuel tank, 25L heating type urea tank, Recor oil-water separator with heating |
| Water flow | 1.0MPa 32L/s |
| Max. suction depth | 7m |
| Priming time | ≤35s |
| Suction inlet | 1xDN100 butterfly valve, electric and manual operation |
| Outside Suction inlet | 1xDN125 suction coupling with stainless steel butterfly valve and lid cover, snap- type |
| Outlet | 2xDN80 ordinary outlet with manual ball value, insertion-type |
| Pump outlet | 10mm stainless steel ball valve, manual |
| Outside liquid inlet | Use G1 1/2’’ manual ball valve and KY40 solenoglyphic tooth coupling |
Where it fits
Fits stations that need foam capability in a short wheelbase appliance for old town streets and yard access. It also works for industrial sites that keep static water on site for drafting.
