60 Meter Dual Booms Water Tower Fire Truck with 315L Fuel Tank 6000L Liquid Tank

  • Working height: The main boom reaches 60 m and the second boom 43 m, covering high-rise floors and tall process structures.
  • Monitor reach: A 31 m working radius on the main boom and 13 m on the second keep the monitor clear of the building.
  • Water capacity: 5000 L of water in a stainless steel tank feeds the HALE 8FC pump at 170 L/s and 1.0 MPa.
  • Foam capacity: 1000 L foam tank shares the stainless steel body, with baffles and a vent valve for foam service.
  • Chassis: An 8×4 Mercedes-Benz chassis carries 42600 kg gross weight at 85 km/h with H style outriggers.
  • Setup: Outriggers spread 8970 mm by 5600 mm on automatic levelling and extend in 40 s or less.
SKU: M2272 Category:

60 m Water Tower Fire Truck with 43 m Second Boom

This water tower fire truck carries a 60 m main boom and a 43 m second boom, giving a dual boom envelope for high rise attack and rescue. It serves city brigades and industrial fire services facing tall buildings and process structures. The headline figure is 60m of working height on the main boom, with a 43m second boom for offset reaches.

The vehicle measures 13100x2500x3960mm and grosses 42600kg, running at 85km/h or more. Outriggers spread 8970mm longitudinally and 5600mm transversely with automatic levelling, extending in 40 s or less. The booms reach 31m working radius on the main and 13m on the second, with 360° infinite rotation. That lets the truck set up on a narrow street and still reach over a building line.

Boom structure is a three section telescopic boom below, a three section telescopic boom above and a folding boom. The lower boom travels 0° to 88° and the upper and lower telescopic booms together reach 164°. Raising to rated height with 90° rotation takes 270 s or less. The HALE 8FC single stage pump flows 170 L/S at 1.0 MPa, or 70 L/S at 1.5 MPa.

The stainless steel tank holds 5000 liter of water and 1000 liter of foam, with transverse and longitudinal baffles, a 4mm bottom and 3mm elsewhere. Two ESP-24V electric slip sheet vacuum pumps give 85kPa or more of vacuum and draw water in less than 50s. The tank also carries a DN125 leak pipe, a vent valve and an electric liquid gauge.

Full specifications

Dimension:(LxWxH) 13100x2500x3960mm
Gross weight 42600kg
Max. running ≥85km/h
longitudinal 8970mm
transverse 5600mm
Outrigger leveling Automatic leveling
Max. working height 60m (main boom)43m(second boom)
Max. working radius 31m(main boom)13m(second boom)
Boom structure 3 section telescopic boom(down)+ 3 section telescopic boom (up)+ folding boom(up)
Boom action angle Down Telescopic boom 0°——88°Up Telescopic boom and down telescopic boom 0°——164°
Rotation range 360°infinite rotation
Outrigger extending time ≤40s
Boom raised to rated height and rotation 90° ≤270s
pump American HALE company, 8FC single stage centrifugal pumpflow:170 L/S @ 1.0 Mpa 70 L/S @ 1.5 Mpaintake flange:DN200,outtake flange:DN150
Vacuum pump ESP-24V electric slip sheet vacuum pump 2 pieces( 24V)Vacuum capacity≥85kPa~suction depth≥~m~water drawing time less than50s.

Where it fits

High rise attack, process structure fires and rescue above the reach of ground monitors. The 60m main boom, the 43m second boom and 360° rotation cover tall buildings and plant columns.