ZZ5207N4617E1 4×2 Foam Fire Truck with 6000 L Water Tank
The ZZ5207N4617E1 is a 4×2 foam fire truck on the Sinotruk HOWO chassis with an original double cabin seating 2+4. It carries 8000 L of fire extinguishant, split between a 6000 L water tank and a foam tank. The appliance sits in the medium size class for city stations, oil terminals and airport fire services.
The 213 kW or 290 hp engine produces 1160 N.m and meets Euro II, driving a 10 speed manual gearbox through a pull type diaphragm clutch. Gross vehicle weight is 19800 kg and the curb weight is 11600 kg, on a 4600 mm wheelbase. Top speed is 100 km/h and the minimum turning diameter is 20 m or less.
The pump is a CB10/60 normal pressure unit flowing 3600 L/min at 1.0 MPa. It uses a piston primer, pulls 85 kPa of vacuum and primes in 50 s or less from a 7 m suction depth. Foam is metered by a PH48 manual proportioner at 3 percent or 6 percent, and the PL48 roof monitor delivers 2880 L/min with a foam range of 55 m.
The tank is built from stainless steel 304 on a total side girder structure to rule GA39.4-92, with an aluminum alloy shutter door body. The equipment compartment, liquid tank and pump room form a split structure. That specification matters on foam duty: the agent is aggressive, and a stainless tank on a girder frame resists corrosion between calls. The roof monitor turns a full 360 degrees.
Full specifications
| G.V.W | 19800 kg |
|---|---|
| Curb Weight | 11600 kg |
| Rated. power | 213kW/290hp |
| Cabin | Original double cabin |
| Model | ZZ5207N4617E1 |
| Drive type | 4×2 |
| Wheelbase | 4600 mm |
| Max. speed | 100 km/h |
| Min. turning diameter | ≤20 m |
| Approach angle | 16 degree |
| Departure angle | 14 degree |
| Engine type | Pressure combustion, In-line six-cylinder, water cooling, inter-cooling, direct injection diesel engine |
| Max. torque | 1160N.M |
| Emission standard | Euro II |
| Clutch | pull type diaphragm |
| Gearbox | Manual, 10 forward gear |
| Pressure/ Flow | 1.0MPa/3600Liters/min |
| Max. vacuum degree | ≥85 kPa |
| Priming time | ≤50s |
| Suction depth | 7m |
| Foam Proportioner | PH48, manual |
| Mixing ratio | 3%, 6% |
| Position | At the top of vehicle |
| Flow | 1.0Mpa/ flow rate: 2880L/M |
| Range | Foam range:≥55m, water range:≥60m (1.0Mpa) |
| Rotation angle | Level≥360° |
| Material | High Quality Stainless Steel 304 |
| Structure | Total side girder structure |
| Technical requirements | Conform to rule GA39.4-92 |
| Equipment compartment door | the light quality aluminum alloy, with shutter doors, lightweight and reliable. |
| Internal structure | the inner frame for the introduction of aluminum lap technology, can maximize space utilization and variability within the equipment, users can request allocation of various sliding bracket, carriage, rotating frame, and high strength plastic storage box and so on, the structure from the space utilization, aesthetic appearance, ease of handling equipment have reached the international advanced level. |
Where it fits
Fits city stations, oil terminals and airport fire services that need a compact foam pumper with a stainless tank. It handles vehicle fires, fuel spills and small tank fires where a fast foam blanket matters more than a large water reserve.
