AD410T50 8×4 Water Tower Fire Truck with 25m Working Height
The AD410T50 is an 8×4 water tower fire truck on a FIAT IVECO chassis, with a 25m working height and a combined tank of 12000L water and 4000L foam. Gross weight is 39750 kg against a 41000kg maximum authorized total mass, leaving 30090kg of loading capacity. Engine power is 368kW/500hp at 1900, and the cabin seats six in a 1+1+4 layout.
Drive goes through a ZF 16S 2520 TO manual gearbox with a monolithic clutch. The chassis carries a 300L steel fuel tank plus a 55L urea tank to China IV. Wheelbase is 1875+3950+1380 mm, chassis net weight 10910Kg, approach angle 26° and departure angle 22°. Fording depth is 500mm and minimum ground clearance is 310mm, which matters on flooded yards and unsealed site roads.
Axle ratings of 2×8500 Kg at the front and 2×13000 Kg at the rear carry the water and foam load, and specific power is quoted as 9.25. The body measures 11865x2500x3800 mm, with the ladder turntable set behind the 1+1+4 cabin. Torque is rated 2300 at 1000, and the 300L fuel tank supports long runs between fills.
Full specifications
| Gross weight | 39750 (kg) |
|---|---|
| Water/ foam tank capacity | 12000L /4000L |
| Seat (inc. driver) | 2+4 |
| Fording depth | 500mm |
| Max. working height | 25m |
| Specific power | 9.25 |
| Model | AD410T50 |
| Driving | 8×4 |
| Cabin | 1+1+4 |
| Wheel base | 1875+3950+1380 (mm) |
| Chassis Net weight | 10910Kg |
| Approach angle | 26° |
| Departure angle | 22° |
| Min. ground clearance | 310mm |
| Max. autohrozed total mass | 41000kg |
| Max. loading weight | 30090kg |
| Front axle allowable load | 2×8500 Kg |
| Rear axle allowable load | 2×13000 Kg |
| Max. engine power | 368kW/500hp@1900 |
| Max. torque | 2300@1000 |
| Fuel tank | 300L steel fuel tank |
| Emission standard | China IV |
| Urea tank | 55L |
| Clutch | Monolithic |
| Gearbox | ZF 16S 2520 TO manual |
Where it fits
Fits large industrial complexes and municipal brigades that need a high volume 8×4 appliance with a 25m ladder for roof access. The water tower fire truck carries enough water and foam to begin attack before a hydrant is established.
