900rpm Water Tower Fire Truck Dual Boom 8X4 Drive Euro V Engine Chassis

  • Water capacity: 5000 L stainless steel water tank with 4 mm bottom plate and internal baffles.
  • Foam capacity: 1000 L foam tank with vent valve and electric liquid gauge for both tanks.
  • Pump flow: HALE 8FC single stage centrifugal pump delivers 170 L/S at 1.0 MPa through DN200 intake.
  • Monitor flow: JIETONG monitor adjusts from 950 to 4800 L/min at a working pressure of 0.55 MPa.
  • Discharge: Water discharge distance of 60 m and foam distance of 55 m at the rated flow rate.
  • Waterway control: Electropneumatic valve control with wireless operation from a distance of 100 m or more.
SKU: M2509 Category:

8×4 Dual Boom Water Tower Fire Truck, 5000 L Water

This 8×4 dual boom water tower fire truck carries a 5000 L water tank and a 1000 L foam tank on a Euro V engine chassis. Two telescopic boom sections carry the monitor above the fire floor. A crew can attack a high rise compartment from outside the collapse zone while the appliance stays on stable ground. The dual boom layout spreads the waterway load over two ladders.

The waterway is made entirely of non corrosive material. It leads through the center post in the turntable up into the working cage where the monitor is mounted. A telescopic water pipe runs along the side of the booms, supported and protected by flexible pressure hose at the knuckles. Relief valves in the pump house guard the line against over pressure.

A HALE 8FC single stage centrifugal pump delivers 170 L/S at 1.0 Mpa and 70 L/S at 1.5 Mpa through a DN200 intake and a DN150 outlet. A DARLEY FSB240-C automatic mixer proportions foam at 0.5 to 10 percent. The monitor adjusts from 950 to 4800 L/min at 0.55 MPa, throws water 60 m and foam 55 m, and elevates from 90 to -45 degrees.

Boom action runs from 0 to 88 degrees on the down telescopic section and 0 to 164 degrees on the combined boom. The turntable rotates 360 degrees without limit. Outriggers extend in 40 s or less and the boom reaches rated height with 90 degree rotation in 270 s or less. The tank is stainless steel with 4 mm bottom plate and 3 mm elsewhere, baffled both ways.

Full specifications

Boom action angle Down Telescopic boom 0°——88°Up Telescopic boom and down telescopic boom 0°——164°
Rotation range 360°infinite rotation
Outrigger extending time ≤40s
Boom raised to rated height and rotation 90° ≤270s
pump American HALE company, 8FC single stage centrifugal pumpflow:170 L/S @ 1.0 Mpa 70 L/S @ 1.5 Mpaintake flange:DN200,outtake flange:DN150
Vacuum pump ESP-24V electric slip sheet vacuum pump 2 pieces( 24V)Vacuum capacity≥85kPa~suction depth≥~m~water drawing time less than50s.
mixer American DARLEY FSB240-C automatically foam proportion mixer,mixer ratio 0.5-10%
NYANG JIETONG Flow adjustment 950 – 4800
L/min working pressure 0.55
Mpa.Discharge distance Water ≥ 60m, Foam ≥ 55m (variable with flow rate)Swivel angle ±45 degrees, elevating angles: +90 degrees to – 45 degrees
Wireless control distance ≥ 100 m
FoamMonitor head self made foam monitor head
Water way control Control mode: electropneumatic valve control
Monitor protection water spray curtain system to protect monitor, electric control
Fireplumbing Down part:stainless pipe+aluminium pipe
External Water Supply External water suction
XDN80 2XDN150
Manual ball valve with lid cover
Tank Internal Suction Tank water supply
XDN200 1XDN65
Pneumatic butterfly valve Pneumatic ball valve
Water outlet Upper Monitor inlet
Water supply from end of vehicle Water supply for second boom
Manual ball valve with cover Manual ball valve with cover
Water Tank Drainage External Foam Suction
XDN65 1XDN50
Manual ball valve withinterface Manual ball valve with cover
External Foam filling Foam Tank Drainage

Where it fits

A fit for industrial fire brigades covering high rise, tank farm and chemical plant risk, where a second elevated waterway shortens the attack. The 5000 L water and 1000 L foam tanks support an initial attack before hydrant supply is established on scene.