25m AD410T50 Water Tower Fire Truck with 12000 L Water
The AD410T50 is an 8×4 water tower fire truck for city main stations. It must combine tanker capacity with a raised monitor. The vehicle carries 12000L of water and 4000L of foam. Its boom reaches a maximum working height of 25m, so one crew can attack a mid-rise fire from outside the building. The single crew can therefore set the outriggers and charge the monitor without a second appliance.
An IVECO engine delivers 368kW and 500hp at 1900 rpm. Peak torque is quoted as 2300 at 1000 rpm through a ZF 16S 2520 TO manual gearbox. The chassis is rated to a maximum authorized total mass of 41000kg. Gross weight is 39750kg on a wheelbase of 1875+3950+1380mm, and specific power is 9.25. The six-cylinder diesel sits behind the cab, which leaves the frame clear for the tank and pump.
The chassis rides on 4x 385/65 R22.5 highway tires at the front. The rear runs 8x 315/80 R22.5 traction tires. Approach and departure angles are 26° and 22°, with 310mm of minimum ground clearance and a 500mm fording depth. The cabin seats 2+4, and a 55L urea tank serves the China IV engine. Tires of this size carry the gross weight without exceeding the axle ratings on the route.
Duty cycles mix long urban transfers with extended pumping. The 300L steel fuel tank and the 12000L water load let the crew work a scene before the first tender arrives. The 25m boom keeps the monitor above the fire floor. That matters when the appliance is parked close to the building. The crew can therefore keep the jet running while the supply line is laid from the hydrant.
Full specifications
| Gross weight | 39750 (kg) |
|---|---|
| Water/ foam tank capacity | 12000L /4000L |
| Seat (inc. driver) | 2+4 |
| Fording depth | 500mm |
| Max. working height | 25m |
| Specific power | 9.25 |
| Model | AD410T50 |
| Driving | 8×4 |
| Cabin | 1+1+4 |
| Wheel base | 1875+3950+1380 (mm) |
| Chassis Net weight | 10910Kg |
| Approach angle | 26° |
| Departure angle | 22° |
| Min. ground clearance | 310mm |
| Max. authorized total mass | 41000kg |
| Max. loading weight | 30090kg |
| Front axle allowable load | 2×8500 Kg |
| Rear axle allowable load | 2×13000 Kg |
| Max. engine power | 368kW/500hp@1900 |
| Max. torque | 2300@1000 |
| Fuel tank | 300L steel fuel tank |
| Emission standard | China IV |
| Urea tank | 55L |
| Clutch | Monolithic |
| Gearbox | ZF 16S 2520 TO manual |
| Front axle | 4x 385/65 R22.5 highway tires |
| Rear axle | 8x 315/80 R22.5 traction tires |
| Rim | 11.75×22.5/9.00×22.5 |
| Spare wheel | 1×315/80 R22.5 highway tire with rim |
Where it fits
Built for city main stations covering mid-rise districts, where one appliance must carry a full water load and still place a monitor above the fire floor. It also suits industrial sites with limited hydrant coverage.
