25 m Water Tower Fire Truck with 4200 L/min Spray
This water tower fire truck places a monitor above a fire through a three section folding boom. Maximum working height is 25 m and maximum working radius is 14 m, with a tank of 8000 kg of water and 2000 kg of foam. The pump flows 100 L/s, and the boom is welded from high strength steel for high rise and warehouse work.
The boom extends in 60 s or less and the outriggers deploy in 35 s or less, with a hydraulic system pressure of 20 MPa. Outrigger spread is 5200 mm longitudinally and 2040 mm transversely. The unit is rated for a maximum wind velocity of 12.5 m/s, and the allowed working range is shown on the control panel so the operator can see the envelope.
The fire fighting system sprays 4200 L/min at 1.6 MPa, with a water reach of 70 m or more and a foam reach of 65 m or more. A foam proportioner meters at 6 percent with manual adjustment. The tank is built from 304 corrosion resistant plate on a welded frame with shock reducing rubber mounts, and it carries two manholes and two level gauges.
Control runs through an EPEC2024 controller with an AUTEC wireless remote that has an effective working radius of 100 m. The operator can therefore stand where the nozzle stream is visible. The vehicle suits city main stations and refinery brigades that must put water over a tank rim or a roof line without committing a crew to the structure.
Full specifications
| Max. working height | 25m |
|---|---|
| Max. working radius | 14m |
| Pump flow | 100L/s |
| Boom extending time | ≤60s |
| Outrigger extending time | ≤35s |
| Hydraulic system pressure | 20MPa |
| Max. wind velocity | 12.5m/s |
| Outrigger longitudinal and transverse | 5200x2040mm |
| Spray flow/pressure | 4200L/min @ 1.6MPa |
| Spray range(water/ foam) | ≥70/65m |
| Foam proportioner | 6%(manual adjustment) |
| Manufacturer | Shanghai Jindun special vehicle equipment Co., Ltd |
| Water | 8000kg |
| Foam | 2000kg |
| Material | 304 corrosion resistant plate |
| Structure | Welded frame, shock-reducing rubber |
| Equipment | 2 manhole2 fluid level gauge2 drain outlet with stainless steel ball valve1 outside suction port, 1 inside filling pipe end4 outside filling pipe end |
Where it fits
Built for city main stations, refineries and large warehouses where a monitor must work above the fire. The 25 m height, 14 m radius and 8000 kg water load cover tank rim fires, roof fires and cooling duties from one position.
